As An Effect Loop Switcher For Microphones - Lehle LITTLE III Operating Instructions Manual

LITTLE LEHLE III AS AN EFFECTS LOOP SWITCHER FOR
MICROPHONES
L I T T L E L E H L E
M A D E I N G E R M A N Y
The usage of effects to manipulate the
sound of your voice is already common-
place.
The LITTLE LEHLE III is optimally suitable
for this function, too, since it can also
switch balanced signals.
It does not have to be a microphone, of
course - the LITTLE LEHLE III also switches
other balanced signal sources.
R S
LEHLE GmbH · Germany · www.lehle.com · support@lehle.com
DEVICE CONNECTION
Input
Send
S
R Return
Output
HOW TO DO THIS
1. Connect your microphone to the input
socket (1) of the LITTLE LEHLE III.
2. Connect the send socket (3) to the in-
put of your effects unit.
3. Connect the output to the return socket
(4) of the LITTLE LEHLE III.
4. Connect the output socket (5) to the
input of a mixer.
5. There you go!
Signals from microphones that require
phantom power cannot be switched this
way, since this would mean that the phan-
tom power would be switched off and on.
Switching phantom power off and on
generally causes a loud noise.
17
Microphone
Input effect(s)
Output effect(s)
Mixer
!