Typical Uses; As An Effects Loop Switcher; Device Connection; How To Do This - Lehle LITTLE III Operating Instructions Manual

TYPICAL USES

LITTLE LEHLE III AS AN EFFECTS LOOP SWITCHER
L I T T L E L E H L E
M A D E I N G E R M A N Y
You can use the LITTLE LEHLE III as an
effects loop switcher for individual ef-
fects units, and also for complete pedal
boards.
Not all effects pedals feature True-By-
pass, and those that don't can cause sig-
nal losses when deactivated.
The LITTLE LEHLE III makes it possible to
eliminate them from the signal path com-
pletely in just one step.

HOW TO DO THIS

1. Connect your instrument to the Input
socket (1) of the LITTLE LEHLE III.
2. Connect the Send (3) of the LITTLE
LEHLE III to the input of the effects unit.
3. Connect the output socket of the ef-
fects unit with the Return socket (4) of the
R S
LEHLE GmbH · Germany · www.lehle.com · support@lehle.com

DEVICE CONNECTION

Input
Send
S
R Return
Output
LITTLE LEHLE III.
4. Connect the Output socket (5) to the
input of your amplifier.
5. There you go!
This works equally well with both mono
and stereo effects. If you are using ste-
reo effects with a mono input, make sure
that the input (1) and send (3) are mono
jacks (TS) and the return (4) and output
(5) are stereo jacks (TRS). Please press
the mono-to-stereo switch (2) too, in or-
der to ensure the mono signal is internally
distributed to stereo correctly.
12
Instrument
Input effect(s)
Output effect(s)
Amplifier