Advertisement
16. Move supported vehicle carefully
and slowly. Keep all people and body
parts out of path of moving vehicle.
17. Do not work on supported vehicle.
18. Keep lifting area free of spectators
and do not allow anyone into
vehicle while on Dollies.
Assembly and Use Instructions
1.
Insert Casters through holes in Frame.
Fasten together using Spring Washers
and Acorn Nuts. See Diagram, below.
2.
Repeat for other Dolly.
3.
Once Dollies are assembled, roll Dollies
along surface to verify all connections
are secure and Dollies roll freely.
Parts List and Diagram
Part
Description
1
Frame
2
Swivel Caster
3
Spring Washer Ø12
4
Acorn Nut M12
Record Serial Number Here:
Note: If product has no serial number,
record month and year of purchase instead.
Note: Some parts are listed and shown
for illustration purposes only, and are
not available individually as replacement
parts. Specify UPC 193175020925
when ordering parts.
Item 61283
Qty
2
8
8
8
For technical questions, please call 1-888-866-5797.
19. Use wheel chocks at opposite
end of vehicle when lifting.
20. This product is not a toy. Do not allow
children to play with or near this item.
21. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
4.
Chock wheels (or chock dollies if
another set of dollies is already in use)
on opposite end of vehicle.
Use appropriate jacks to safely lift front
or rear end of vehicle. Place Dollies
in position under raised wheels and
lower vehicle slowly onto them.
5.
If raising front and rear of vehicle, use
jack to raise other end, remove wheel
blocks, and set up four Dollies (sold
in sets of two). Once vehicle is resting
on all Dollies, carefully guide vehicle.
Page 3
Advertisement
