Advertisement
Owner's Manual & Safety Instructions
Owner's Manual & Safety Instructions
Save This Manual
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
Keep this manual and the receipt in a safe and dry place for future reference.
the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
please call 1-888-866-5797 as soon as possible.
©
©
Copyright
2011 by Harbor Freight Tools
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
®
®
. All rights reserved.
. All rights reserved.
Read this material before using this product.
Read this material before using this product.
Failure to do so can result in serious injury.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
SAVE THIS MANUAL.
20j
Advertisement
Related Manuals for HAUL MASTER 60438
Summary of Contents for HAUL MASTER 60438
- Page 1 Owner’s Manual & Safety Instructions Owner’s Manual & Safety Instructions Save This Manual Save This Manual Keep this manual for the safety warnings and precautions, assembly, Keep this manual for the safety warnings and precautions, assembly, operating, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the inspection, maintenance and cleaning procedures.
-
Page 2: Table Of Contents
Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 60438... -
Page 3: Safety
8. Keep clear of load while lifting and lowering. operator that common sense and caution are factors which cannot be built into this product, 9. Lower load slowly. but must be supplied by the operator. SAVE THESE INSTRUCTIONS. Item 60438 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Specifications
Locking Bar (117). Functions Handle (101) Table (141) Control Lever (102) Pump Lever/ Foot Pedal (139/140) Locking Bar (117) Locking Swivel Caster (118) Figure A Page 4 For technical questions, please call 1-888-866-5797. Item 60438... -
Page 5: Operation
The work area must not allow access by surface that is free of debris. Sweep area children or pets to prevent distraction and injury. clean of dirt and debris if needed. Item 60438 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Table as far as it will go. Clean, then store 4. Release the Locking Swivel Casters by the cart indoors out of children’s reach. moving the levers to the unlock position. Move the work piece to the desired location. Page 6 For technical questions, please call 1-888-866-5797. Item 60438...
-
Page 7: Maintenance
Protect it from 8. AFTER USE, wipe external surfaces being damaged from other items being of the tool with clean cloth. moved in and out of its storage area. Item 60438 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Parts Lists And Diagrams
Scissor Arm Assembly Elastic Washer Washer Bushing Retaining Ring Spring Connecting Rod Retaining Ring Handle Lock Pivot Cushion Protective Mat Handle Locking Bar Bolt Locking Swivel Foot Pedal Pump Lever Caster Page 8 For technical questions, please call 1-888-866-5797. Item 60438... - Page 9 Spring Piston Spindle Strike Pin Steel Ball O-Ring Seal Washer Piston Rod Pumping Axle Sleeve Seal Washer Valve Seat O-Ring Cylinder Cap Pumping Valve O-Ring Spindle Screw Dust Ring Spring Item 60438 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 10 For technical questions, please call 1-888-866-5797. Item 60438...
- Page 11 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175041869 when ordering parts. Item 60438 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.