Advertisement
Specifications
Important Safety Information
Assembly Precautions
1.
Assemble only according to these
instructions. Improper assembly
can create hazards.
2.
Wear ANSI-approved safety goggles
and heavy-duty work gloves
during assembly.
3.
Keep assembly area clean and well lit.
Use Precautions
1.
Study, understand, and
follow all instructions before
operating this device.
2.
Do not exceed rated capacity.
3.
Use only on hard level surface.
4.
Before moving a load, assure that
the load is centered and secured
with a load restraint device.
5.
No alterations shall be
made to this product.
6.
Wear ANSI-approved safety goggles
and heavy-duty work gloves
during use.
7.
Keep clear of load's path while
placing on and removing from
dollies, and while moving.
8.
Do not use for aircraft purposes.
9.
Inspect before every use; do not
use if parts loose or damaged.
Page 2
Maximum Weight Capacity 1000 lb. (per Dolly)
Wheels
Maximum Tire Width
For technical questions, please call 1-888-866-5797.
Four Swivel Casters
13-9/16"
4.
Keep bystanders out of the
area during assembly.
5.
Do not assemble when tired
or when under the influence
of drugs or medication.
6.
Weight capacity and other product
capabilities apply to properly and
completely assembled product only.
10. Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
11. Use Vehicle Dollies to support
FRONT or REAR end of the vehicle.
Do not use Dollies to support one
side of vehicle. Use four Dollies
(two pairs) to support entire vehicle.
12. Read vehicle owner's manual
and instruction manual for
Jack (not included) for proper
jacking positions before use.
13. Position Dollies so that rails
are parallel to the wheels.
14. Make sure sides of tires do not
press against Dolly edges.
15. If used for extended storage under
Vehicle tires, periodically lift Vehicle
and turn tires to preserve tire shape.
Item 61283
Advertisement
