Stand Features - American Dynamics AD9615V Instruction Manual

STAND FEATURES

2
In order to install the desk-top stand at LCD monitor properly,
First, fix the metal plate provided to LCD monitor with 4 screws of only FH4X6
size only and the desk-top stand to the metal plate with 4 screw of M4 size.
Lastly, put the hinge cover on the hole located on the rear side of LCD monitor .
Note) 1. Since the metal plate has the regular interval of VESA standard, users
can use it with any other monitors which support VESA standard.
2. CAUTION : For the safety and better usage, use only FH4X6 size
screws provided when you fix the metal plate to LCD monitor.
Tilt adjustment
LCD mounting
Construction
Finish
Maximum load
Dimension
Weight
4
1-1
1-2
3
5
o o
-5 ~ 30 (up or down)
eight(8) M4 x 8L
Plastic and Metal
Painting
4.5Kg
256.5mm x 165mm x 190mm
With 15" (Height) : 355mm
With 17" (Height) : 371.25mm
Unit
1.2Kg
- 22 -
1-1. FH4X6 size SCREW
1-2. M4 size SCREW
2. METAL PLATE
3. HINGE
4. HINGE_COVER
5. STAND
SECTION
MONITOR STAND
Shipping
1.5Kg