Table of Contents
Advertisement
BACK VIEW
13. AC IN SOCKET
Connect the AC power cord (supplied)to this socket and to a wall outlet.
14. VIDEO IN/OUT CONNECTOR (A/B CHANNEL)
Connect to the video output of a VCR or another monitor (for loop-through
connection) or to a video camera.
Loop-through output of the video in connector. connector the video input of
another monitor or a VCR
Note :
The impedance is automatically set to 75 ohm by the input of a signal
on the input connector while operating in a single connection mode.
However, if a cable is connected to the output connector, the
connection is placed into the open status by the multiple connection
and high impedance automatically selected.
Caution :
Do not leave an unused cable connected to the monitor. If a single
cable is used, then it must be connected to the input connector for
the 75 ohm autotermination selector to function properly.
15
13
14
- 7 -
17
16
Advertisement
Table of Contents
