Download Print this page

Summary Of Operations; Connecting And Starting-Up; Level Control - AER BINGO Operating Instructions

Advertisement

Part of the action
Channel 2:
Input
Line/Mic
Clip
Gain
Bass
Treble
Eff. Pan
Select
Return
Power
Master
Rear (from left to right):
Phones
Tuner
Line-out
DI-out
Send
Return
F/S
Power

4. SUMMARY OF OPERATIONS

Connecting and starting-up:

Check to ensure that the mains voltage at your location corresponds to what is permit-
ted for operating the BINGO. You will find the necessary information on the rear side
under „Dest." (country of destination) and „AC-voltage". Before switching the amp on,
the „Master" and „Return" controls should be turned to the zero position (as far left as
they will go) and all other controls to middle position. Then make all necessary cable
connections (mains, instrument and/or microphone). Now you can switch on your
BINGO with the power switch on the rear of the amp. The green power indicator shows
that the amp is operational.

Level control:

You can use the „High/Low" switch and the „Gain" control to adjust the various pick-up
systems and signal sources to BINGO. The clip indicator shows that the input signal is
XLR combination with a socket for a 6.3 mm jack plug and XLR male socket
switch to adjust input sensitivity
Line: sources with line level, instruments with active preamplifiers
and magnetic sound pick-ups, Mic: symmetrical microphone input
with 30 V phantom source
overload indicator
input level control
tone control for bass
tone control for treble
panorama control to distribute the effects between the channels
switch for two effect programmes (reverberation, reverberation/delay)
level control for the internal effect
power indicator lamp
level control for the overall volume
headphone output
output for a tuner after the master control
preamplifier output after the master control
XLR output before the master control
output for an external effect device
input for an external effect device or another signal source, for example
CD player
connection for a double foot switch with which the effects can be
switched on and off (See 4. Summary of Operations).
combined mains switch with a mains socket and a fuse holder
(1 A slowblow)
BINGO
A
3

Advertisement

loading