Advertisement
10
Versa Lift
1. UNPACKING:
Save Carton #1! (You will need the two
long lift housing cartons (overpack, telescoping box and
foam blocks) for warranty repairs. So please save them!)
The Versa Lift is packed in three cartons. The carton
contents are shown below in Fig. 20. The fasteners
shown in Fig. 20 inset will be in a hardware bag (you
CARTON 1
Lift Control
Device Carton
1a, 1b
or 1c
1
3
2
CARTON 2
27
Carton Contents
Lift Head
Assembly
6
5
7
Model 24
Attic Storage Lifting System
Model 24 H
8
INSTALLATION GUIDE
Model 24
Model 24 H
Attic
A ttic
Storage
S torage
Lifting
4
S y s t e m
S ystem
SAFE TY GUIDE
Byers Products Group
OPE RAT IO N
MAINTE NANCE
SAFE TY GUIDE
OPE RAT IO N
MAINTE NANCE
US & Foreign Patents Pending
US & Foreign Patents Pending
Copyright © 2006 BPG
29
28
30
don't need to count the hardware). Open the cartons and
check the contents to locate all of the items in Fig. 20.
Also, check the components in all three cartons for any
damage. If any components are missing or damaged, do
not proceed with assembly. Contact us to get needed
replacements for any missing or damaged items.
Hardware Bag
17
9
18
19
10
20
21
11
22
23
12
24
13
25 26
TM
Byers
Prod uct s
Gro up
14
TM
L iftin g
15
16
Copyright © 2006 BPG
Pan Head Truss Head
CARTON CONTENTS:
27. Lift Housing Legs (4)
28. Right Platform Legs (2)
29. Left Platform Legs (2)
30. Cable Clamps (2)
31. Platform Leg Brackets (2)
32. Mounting Rails (2)
33. Platform Supports (2)
34. Platform Top Brace (1)
CARTON 3
All Models 24:
24, 24H, 24HX & 24HXX
CARTON CONTENTS
:
1. Model 24 Lift Head Assembly (1)
1a. Corded Remote Control or
1a. Corded Remote Control or
1b. Mounted Wall Switches or
1c. Wireless Radio Control
2. Short Door Braces (2)
3. Long Door Braces (2)
4. 2 x 2" x 20" "L" Flashing (4)
5. Long Chains (2)
6. Short Chains (2)
7. Installation Guide (1)
8. Owners Manual (1)
Hardware Bag Contents:
9. ¼" x 2½" Lag Screw (10)
10. ¼-20 x 2" Phillips Truss Screw (5)
11. ¼-20 x 1½" Phillips Truss Screw (28)
12. ¼-20 x 2½" Phillips Pan Screw (5)
13. 10-32 x 1" Phillips Pan Screw (10)
14. 10-32 x 5/8" Phillips Pan Screw (10)
15. 10-32 x 3/8" Phillips Pan Screw (10)
16. ¼ x 1" Flat Washer (10)
17. ½ x 1" Nylon Guide Spacer (10)
18. ¼-20 Tall Flanged Locknut (44)
19. ¼-20 Short Locknut (5)
20. 10-32 Locknut (10)
21. Screw Cover (10)
22. 1/2 x 3/8"Cable Clamp Spacer (12)
23. 6-32 x 5/16" Phillips Screw (5)
24. #17 x 1" Flashing Nails (50)
25. #2 Phillips Driver (for 6-32 &10-32)
26. #3 Phillips Driver (for 1/4-20 screws)
Note: Hardware Bag
contains extra hardware
not listed here. Not all
hardware will be used
during this assembly.
CARTON 3 CONTENTS:
35. Platform Panel (1)
36. Door Panel (1)
35
Figure 20
Advertisement
