"Remove the Wi-Fi card" on page 34
"Remove the fan" on page 36
"Remove the heatsink" on page 38
"Remove the Type-C bracket" on page 39
Step 1.
Disconnect the EDP cable, camera and sensor board cable, speaker cable, keyboard cable,
keyboard backlight cable, fingerprint sensor cable, touchpad cable from the system board.
Figure 28. Disconnect cables
Step 2.
Remove one screw. Then, remove the system board.
Figure 29. Remove the system board
Screw specifications
M2 x 3.5
46
Yoga 6 (13", 05) Hardware Maintenance Manual
Number of screws
1