Screw specifications
M1.6 x 2
Step 2.
Disconnect the fingerprint sensor cable from the system board. Then, remove the fingerprint
sensor.
Figure 24. Remove the fingerprint sensor
Go to
https://support.lenovo.com/partslookup
replacement part:
Fingerprint sensor
Remove the antenna cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
Number of screws
1
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
43