B) Lipo Batteries - VOLTCRAFT WBP-80 Operating Instructions Manual

• Consult an expert when in doubt about the
operation, safety or connection of the device.
• Maintenance, modifications and repairs must
only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.

b) LiPo batteries

• The rechargeable battery is permanently built
into the product and cannot be replaced.
• Never damage the rechargeable battery.
Damaging the casing of the rechargeable
battery might cause an explosion or a fire! Unlike
conventional batteries/rechargeable batteries
(e.g. AA or AAA type), the casing of the LiPo
rechargeable battery does not consist of a thin
sheet but rather a sensitive plastic film only.
• Never short-circuit the contacts of the
rechargeable battery. Do not throw the battery
or the product into fire. There is a danger of fire
and explosion!
• Charge the rechargeable battery regularly, even
if you do are not using the product. Due to the
rechargeable battery technology being used,
you do not need to discharge the rechargeable
battery first.
• Never charge the rechargeable battery of the
product unattended.
• When charging, place the product on a surface
that is not heat-sensitive. It is normal that a
certain amount of heat is generated during
charging!
35