Advertisement
Getting to know your 24*7
Preparing the machine for use, programming the keypad:
Fold length options NOTE:
Use the double fold selection button to choose single/double fold.
0 = 0mm
= 5mm
Foil length options:
= 160mm
= 230mm
Choose which lengths of foil you would like to select using the - and + foil length selec-
tor buttons. Insert your foil collection tray by inserting the locator found on the rear of
the tray into the slot at the front base of the 24*7. It is important that the tray is correctly
fitted in order for the foil to stack neatly.
Choose which fold option length you would like and select with the - and + fold length
selector buttons. Select the single or double fold using the double fold selector button.
Choose the number of foils you require (between 1 - 50) using the - and + foil quantity
selector button.
Once you are happy with your selection press the start button and your foils will
automatically dispense into the foil collection tray. Do not interfere with the foils coming
out of the machine in any way as this may cause problems.
You may pause the operation at any time by pressing the 'stop' button (1), simply press
the start button (2) to continue the operation. If you wish to change the length, fold
length or number of foils at any time during the operation, simple press the 'stop' button
(1) and make the required changes before re-starting with the start button (2).
To cancel an operation or to reset the machine press and hold the stop button (1). This
both cancels the current operation and resets the machine to the last settings entered.
Each time you switch the machine on it will immediately recall the last setting entered,
you may use these settings or reset at any time.
#freedomtocreate
= 10mm
= 15mm
= 300mm
= 350mm
Page 6
Advertisement
