6
Incubation and Incubator Operation
6.3.2 Setup Menu
• The Setup menu allows the user to set
the incubator preferences and validate
performance
• To enter the Setup menu use the
UP/DOWN keys to scroll to Setup
on the Mode page
Once highlighted press 'OK'.
The following screen is displayed.
• Press 'YES'
• Use the UP/DOWN key to scroll
between the items in the Setup menu
User ID
Select or edit the username using
alphanumeric characters. There are
8 separate User ID profiles.
• To create a new User ID, highlight one
of the available profiles and press 'OK'
• Select 'Edit' to adjust User ID
or 'Delete' to reset to default
• Use the UP/DOWN buttons to
show/change characters
22
• When the correct character is shown,
release the key. The cursor moves to the
next character automatically, up to a
maximum of 12 characters
• Complete the process by pressing
'DONE' briefly. To modify an existing User
ID, highlight the ID and press 'OK' briefly
• Choose 'Edit' and use the UP/DOWN
keys to select the required alphanumeric
characters
To remove a character press 'Back' or
briefly press 'Back' to allow editing of
the right hand character.
• Once complete, press 'DONE' briefly
to return to the Setup menu
• To delete an existing User ID, highlight
the ID and press 'OK' briefly
• Choose 'Delete' and press 'OK'
• To return to the Setup menu, press 'BACK'
Tests
Select the incubation temperature to set
required time. There are two preset options
available on the Wagtech incubator:
37ºC for 18 hours
44ºC for 18 hours
Incubation time can be adjusted to the
required period using the UP/DOWN keys.
Speaker
To Set the incubator speaker volume:
• Highlight 'Speaker' and press 'OK'
• Use the UP/DOWN keys to adjust
the volume
• Press 'OK' to confirm and return
to the Setup menu
Set Date Format
To set the preferred date format:
• Highlight 'Set Date Format'
and press 'OK'
• Select DD/MM/YY or MM/DD/YY
as required
• When correct press 'OK'
Need help?
Do you have a question about the Wagtech Potatest + and is the answer not in the manual?