Thank you for purchasing the MIRA bench oak. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making as great products as possible. From our in-house Design Team, to our buyers, we work together to bring great design to life.
Make sure the legs remain in contact with the ground at all times. Don'ts Do not over tighten screws or bolts. Do not stand on the product. Do not use power tools to construct as overtightening and panel failure may occur. John Lewis 03456 049 049 Autochoice'Furniture'...
Page 4
Your Bench Descreption Dimensions Bench top 1400mm x 340mm x 74mm 426mm x 348mm x 130mm Internal dimensions Stock Number: 836 23502 Bench overall size: L140 W34 H45 cm Internal overall size: L112 W6 H37.5 cm...
Fixtures and fittings Fixtures and fittings supply (actual size) Descreption Dimensions Bolt M8 x 45mm Bolt M8 x 65mm Fixtures and fittings supply (not actual size) Descreption Dimensions Spring washer Washer Allen key L...
Product assembly MIRA bench oak 836 23502 Step 4 Final assembly Parts and fittings Bench specific warnings Never tilt the bench. Ensure the bench is always placed firmly on the ground. Regularly check leg attachment and retighten screws as necessary. Do not use bench if legs are unstable.
Page 10
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture. Retain these instructions for future reference. John Lewis Partnership 171 Victoria Street London SW1E 5NN...