Epson FX-880+ Quick Manual page 31

8. Hold the ribbon cartridge by its handle
and insert it into the printer as shown
below; then press both sides of the
cartridge firmly to fit the plastic hooks
into the printer slots.
9. Use a pointed object, such as a ball point
pen, to guide the ribbon between the
print head and ribbon guide. Turn the
ribbon-tightening knob to help feed the
ribbon into place; it should not be
twisted or creased.
Downloaded from: http://www.usersmanualguide.com/
EPSON FX-880+/FX-1180+ Quick Guide
10. Slide the print head from side to side to
make sure it moves smoothly.
11. Reinstall the paper tension unit by
lowering it onto the printer's mounting
pegs. Then press down on both ends of
the unit until it clicks into place.
12. Replace the printer cover by inserting
the front tabs into the slots on the printer
and lowering the cover into place. Then
push it down until it clicks.
Ribbon Cartridge (3/3)