Before You Start - Elinchrom ELB 1200 Pro User Manual

User Manual
Weight in kg (lbs), head with 4m
cable
Supplied with
EN
Tolerances and specifications conform to IEC and CE standards. Technical data subject to change
without notice.

BEFORE YOU START

The ELB 1200 and the ELB 1200 heads are portable units, which will be frequently used "on
location" . Please be aware of the danger, or inconvenience, which it may represent to others
for example children.
• Ensure that the power pack is switched OFF.
• Connect the flash cable with the security locking ring to the power pack.
• Adapt the reflectors or accessories, which are required for the shooting.
• Only correctly fitted flash cable connections are secured against moister and dust.
• Power pack outlets not in use must be protected with the security covers.
• Check all connections again; the cable must be locked with the security ring and then
switch on the unit.
Please read the ELB 1200 power pack manual.
• Always switch off the unit before connecting or disconnecting heads.
• Always switch off the unit before connecting accessories and reflectors.
• Ambient temperature when the unit is in use: -20° C (-4° F) up to 40° C (104° F).
USER SAFETY INFORMATION
• Because a portable flashhead is frequently used "on location" please be aware of the
danger, or inconvenience, which it may represent to others for example children.
• Keep flash units out of reach of unauthorised persons whenever possible.
• Do not use in restricted areas (like hospitals, always ask permission before).
• Do not use near flammable / explosive material.
• Always switch off the unit before connecting or disconnecting heads.
• Flashtubes and the LED-reflector dishes may become very hot during and after use!
• Do not touch the LED; this might cause damages.
• Never touch a flashtube or exchange it before the unit has cooled down and is
disconnected from the battery.
• Do not fire flashes from short distances when directed towards a person.
• Minimum distance for persons: 30 cm, for animals 1 – 2 m.
4
2.2 (4.85 lbs)
4m cable, flashtube, LED modelling lamp, protective cap,
glass dome