Subscribe to Our Youtube Channel
Related Manuals for Ingersoll-Rand 1101 Series
Summary of Contents for Ingersoll-Rand 1101 Series
- Page 1 16605958 Edition 2 May 2014 Air Percussive Rivet Buster Models 9001 and 11001 Maintenance Information Save These Instructions...
- Page 2 Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially hazardous situations, could result in death or serious • injury. • Read and understand this and all other supplied manuals before installing, operating, repairing, maintaining, changing accessories on, or working near this product.
- Page 3 Assembly of the Throttle Handle Valve lapping Secure the Throttle Valve Face (5), Lock Washer (8), and Throttle Arbor Valve Valve Face Cap (6) to the Throttle Valve Assembly (4) using the Throttle Face Cap Nut (7). Insert the Throttle Valve Assembly (4) into the Handle, stem end first.
- Page 4 Snap the Exhaust Deflector (19) onto the Barrel so the large end hole in the Lock Key. butts against the Locking Ring. Remove the tool from the vise. For Plain-Type Retainer No. 11001-18 Assembly of the Accessory Retaining Mechanism Slide the Lower Sleeve (24) into the accessory and insert the For Threaded Retainer No.
- Page 5 Notes:...
- Page 6 Notes:...
- Page 7 Notes:...
- Page 8 ingersollrandproducts.com © 2014 Ingersoll Rand...
Need help?
Do you have a question about the 1101 Series and is the answer not in the manual?
Questions and answers