reset
1. Turn to timer screen (6). "TIME" is not flashing.
2. Press and hold the SET button key for about 3
seconds, the screen turns to reset mode. The
screen displays "CLr".
3. Press and hold the STA/STP button to reset all
data. Note: the set tariff will not be removed, it
is stored in a fixed memory.
4. Press the SET button during the setting to
cancel and return to timer screen (6).
SPeciFication
• Power: max. 3000 W
• Measurement deviation:
• 5 % (0-20 W)
• <1% (20-3000 W)
• Resolution: 0,1 W
• Operating temperature: 0~45ºC
• Power consumption in standby: < 0,5 W
• Mains voltage: 230 V; 50 Hz
• Tariff settings
• Display
• Measures: voltage, frequency, current (present,
highest, lowest), power consumption, using time,
approximate of electricity expenses, power factor
Owner's manual
EN
13