Advertisement
Item Description
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Hexagon Screw Driver
Crisscross Screw Driver
Electric Iron
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Use T-15 screw driver to loose thumb screw and remove access panel.
2. Disconnect ODD power cable and ODD SATA cable from ODD.
3. Press the ODD's latch on ODD cage
4. Remove the ODD from ODD cage
5. Remove Front Bezel from chassis
6. Disconnect HDD power cable and HDD SATA cable from HDD.
7. Remove the driver cage from Chassis
8. Use T-15 screw driver to loose the screws of HDD and remove HDD from HDD cage
9. Disconnect all cables from MB
10. Disconnect system fan cable from MB
11. Disconnect Cooler Fan cable from MB
12. Use T-15 screw driver to loose the cooler screws and remove cooler from MB
13. Use T-15 screw driver to loose the screws and remove the fan
14. Separate the fan from CPU heat sink
15. Remove memory from the MB
16. Rotate the handle and open it up
17. Remove the CPU from the board
18. Remove SSD M.2 Card
19. Remove WLAN M.2 Card
20. Remove the battery from the system board
21. Use T-15 screw driver to loose the screws of MB from board
22. Remove MB from chassis
23. Remove speaker from Chassis
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
HPI instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
Tool Size (if
applicable)
T-15
PH1
QUICK 310
Page 2
Advertisement
