NETGEAR GS116v2 Installation Manual

Installation Guide
16-Port Gigabit Ethernet Unmanaged Switch
Model GS116v2
Package Contents
• Gigabit Ethernet switch
• Power adapter (varies by region)
• Installation guide
Note: You can wall mount the switch. A wall-mount kit is not included.
1. Register with the NETGEAR Insight app
Use the NETGEAR Insight App to register your switch, activate your warranty, and
access support.
1. On your iOS or Android mobile device, visit the app store, search for
NETGEAR Insight, and download the latest app.
2. Open the NETGEAR Insight app.
3. If you did not set up a NETGEAR account, tap Create NETGEAR Account
and follow the onscreen instructions.
4. Tap the menu in the upper-left corner to open it.
5. Tap REGISTER ANY NETGEAR DEVICE.
6. Enter the serial number located on the bottom of the switch, or use the
camera on your mobile device or tablet to scan the serial number bar code.
7. Tap Go.
8. Tap View Device to add the switch to a network.
The switch is registered and added to your account.
2. Connect the switch
GS116v2
Access point
Router
Desktop ReadyNAS
Smart TV Gaming console
Sample connections
3. Check the LEDs
When you connect the power adapter to the switch and plug it into an electrical
outlet, the LEDs indicate the status.
LED Description
Power • On. The switch is receiving power.
• Off. The switch is not receiving power.
• Both LEDs are solid green. 1000 Mbps link on this port.
Port
(left and right)
• Left LED is solid green. 100 Mbps link on this port.
• Right LED is solid green. 10 Mbps link on this port.
• Blinking green. The port is sending or receiving traffic.
• Off. The switch does not detect a link on this port.
Internet