JUNO JM60170111 User Manual page 8

INSTALLING THE APPLIANCE
2.5 mm
4 mm
8
1. Remove all packaging and check carefully for
2. This oven is designed to fit into a 350 mm high
4 mm
3. Fit the fixing hook to the right hand side of the
2.5 mm
4. Fit the appliance into the kitchen cupboard
5. Ensure the appliance is stable and not leaning.
any signs of damage.
cupboard as standard. When fitting into a
360 mm high cupboard:- Unscrew and remove
the 4 feet from the bottom of the oven. Rotate
the feet 90 degrees and refit with the long side
to the front of the oven.
kitchen cupboard using the instruction sheet
supplied.
slowly, and without force. The appliance should
be lifted onto the fixing hook and then lowered
into place. Fix the oven on the left hand side
using the two screws provided.
Ensure that a 2.5 mm gap is kept between the
cupboard door above and the top of the frame
(see diagram).