Download Print this page

Connect The Printer; Install The Printer Driver - Pitney Bowes PB-SP100 Installation Instruction

Stand-alone label printer mac installation, usb connection

Hide thumbs Also See for PB-SP100:

4. Align the label roll.

Press the

Note: If the label does not feed correctly please refer to label

alignment instructions inside the printer top cover.

Tear off the dispensed label.

5. Connect the printer.

Connect your printer to your computer with the USB cable.

7. Download the printer driver.

1. Go to

2. Select Download Drivers for PB-SP100 Printer in the

Downloads section.

3. Select

section and save Software_PBSP100CupsDrv_MAC_

v1.0.0.dmg file to Downloads.

4. Double click on and extract Software PBSP100CupsDrv_

MAC_v1.0.0.dmg.

1. Double click on Software PBSP100CupsDrv_MAC_

v1.0.0.installer.pkg file.

If below message appears, select OK to close it.

button and check that the label feeds correctly.

support.pb.com/pb-sp100

in the Download your Mac printer driver

Table of Contents