Clear All Files Command; Status Screen - Alphasmart AS Pro Owner's Manual

works in stand-alone mode only, not when the AlphaSmart
is attached to a computer).
With Sticky Keys enabled, you can type combination key-
strokes without actually pressing the keys simultaneously.
For example, you could press Option-
AlphaSmart speed menu.
Sticky Keys affect the four modifier keys: shift, option, com-
mand ( ), and control. When Sticky keys are enabled, press-
x
ing a modifier key effectively keeps that key "pressed down"
for the next normal key press.
The current state of the shift, option, command, control,
and caps lock keys are shown in the lower right of the
AlphaSmart screen. The last four characters in the lower right
corner of the display show which keys are "down" and
which keys are "up."
• The right-most character is the caps lock indicator, and is
solid black if the caps lock key has been pressed. Caps lock
is not affected by Sticky key settings.
• The second character from the bottom right corner is the
command ( ) key indicator. If the command key is down, a
x
C will be displayed here.
• The third character from the bottom right corner of the
screen is the option key indicator. If the option key is down,
an O will be displayed.
• The fourth character from the lower right corner of the
screen is the control key indicator. If the control key is
down, a C will be displayed here.
• The fifth character from the lower right corner of the
screen is the shift key indicator. If the shift key is down, an
"S" will be displayed here.
Figure 10 shows an example of what the screen would look
like if all the modifier keys (shift, control, option, command,
and caps lock) were in the "down" position.
24
-S to get to the
x
AlphaSmart Pro
Figure 10. Example shows modify indicators in the lower right
corner of the screen
Figure 11 shows just the control and shift keys down.
Figure 11. Example shows the control and shift modify indicators
in the lower right corner of the screen
C L E A R A L L F I L E S C O M M A N D
Press Option- -control-shift-clear file to erase all eight files
x
simultaneously. You will be asked if you are sure—pressing
the Y key at this point will clear files 1 through 8. However,
this deletion is not permanent, and you can still recover any
of the files using the Option-
as you have not typed over the files.
S T A T U S S C R E E N
Press Option- -V to get to the system status screen (this
x
command works in stand-alone mode only, not when the
AlphaSmart is attached to a computer). This screen tells you
the AlphaSmart version number, what the current file num-
ber is, AutoRepeat and StickyKeys status, and which keypad
layout option is currently in use.
AlphaSmart Pro
-R recover command as long
x
25