Whirlpool WEFV08S-1A Installation Instructions Manual page 6

4. Using UL listed wire nuts, connect the field supply wires to
the electric furnace (black to black and yellow to yellow).
WARNING
Electrical Shock Hazard
Electrically ground furnace.
Connect ground wire to green pigtail lead.
Failure to do so can result in death or electrical shock.
5. Connect ground wire to green pigtail lead.
1
2
3
1. Connect black to black
2. Connect yellow to yellow
3. Connect green to green
6. Replace the blower access panel.
6
208 Volt Conversion
WARNING
Electrical Shock Hazard
Disconnect all power supplies before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect all power supplies.
2. Remove the blower access panel.
3. Move the 2 connected black transformer leads from the 240
Volt terminal on the transformer to the 208 Volt terminal on
the transformer. See "Wiring Diagram - Blower".