Wiring Diagram; Initial Start-Up - Qlima ECO 1700 Installation Manual

4
54
Instal_man_ECO1700('20)V6.indd 54 Instal_man_ECO1700('20)V6.indd 54
11. Buig en knik de kabel niet.
Any damaged power cord or plug should only be replaced by the
supplier, a competent technician or an authorised service technician.

9.1 WIRING DIAGRAM

Figure 9:
1. Pellet auger motor
2. Pressure differential pressure monitor
3. Manual thermostat reset
4. Flue gas sensor
5. Room temperature sensor
6. Flue gas fan encoder
7. Flue gas fan
8. Space fan
9. Ignition rod
10. 230V power supply connection
11. Printed circuit board
12. Display
13. Flat connection cable for the display

10. INITIAL START-UP

Read the user manual carefully before using for the first time (especially chapter 3).
30-07-20 16:54 30-07-20 16:54