Allied Telesis Switchblade AT-x900-12 Software Configuration Manual page 9

Example 2-3: Setting the Layer 3 (TOS/DCSP) priority per ingress port
Use the same configuration provided in Example 2-1 on
set cos <cos-value>
to
set dscp <dscp-value>
Example 2-4: Setting the Layer 3 (TOS/DSCP) priority per VLAN
Use the same configuration provided in Example 2-2 on
set cos <cos-value>
to
set dscp <dscp-value>
Page 9 | AlliedWare Plus™ OS How To Note: QoS
2. Setting the priority on a packet
page 7, but change the following line:
page 8, but change the following line: