TECHWOOD TRO-6092 Instruction Manual page 9

1 / Place the lid on the container.
2 / Turn the lid clockwise to lock it to the container.
NOTES: The triangle of the base and of the bowl must be aligned one above
the other.
Use the pusher to pass food through the chimney.
Put the plunger in place during operation to avoid splashing
SETTING UP THE BLENDER AND COVER OF BLENDER
The Blender
1 / Take the blender by the handle and position it on the base.
2 / Turn clockwise to lock in safety position.
The triangle of the base and of the blender must be aligned one above the other.
Note: the knife inside the blender is not removable. Do not touch it with your
fingers
THE BLADE IS VERY SHARP, USE EXTREME CAUTION WHEN HANDLING
(INSTALLATION, CLEANING OUT THE WOUND AND FOOD) TO REDUCE THE
RISK OF INJURY.
The cover
1 / Place the lid on the blender jar. On the cover, The line must be in front of the
line on the bowl.
2 / Turn the lid to cover the protrusion recessed into the top of the handle.
NOTE: • The opening in the lid of the blender is used to add liquid and solid foods
during operation.
• Use the pusher to move food through the opening of the cover.
• It is advisable to close the blender with the cap during operation to avoid
splattering out of bowl.
SETTING UP THE MIXER COVER
9