Table of Contents
Advertisement
TIPS
Cut food into 3cm cubes. Arrange evenly in the container.
The device axe very quickly. SO ! operate intermittently for very short periods.
Do not let the unit run long continuously.
If foods are attached to the knife or multi-container, disconnect the device, wait for
complete shutdown of the knife, remove the cover, remove food or knife attached
to the inside of the container with a spatula.
To add food during use:
The opening in the lid of the mixer should be used to add nutrients such as oil or
juice during the operation of the apparatus.
To do this, remove the small cover in the centre of the lid and pour the food.
It may be that you have to stop the device from time to time to remove pieces of
food in the bowl. In this case,
• Unplug the unit, wait a full stop, remove the cover.
• Remove food attached to the inside with a spatula, keep the spatula away from
the blades of the mixer.
After use, put the switch to "0", after complete shutdown of the unit, unplug the
power cord from the socket outlet.
KNEADING AND / OR MIXING
• Place the container on the base.
• Assemble the kneader on the axis drive.
• Put the drive shaft in the container.
• Put ingredients (flour, eggs etc..) Into the container.
• Put the lid on the container and the pusher on the opening lid.
• Choose the highest speed.
• Start the unit for 1 minute.
BLENDER JUG
THE BLENDER WILL WORK ONLY IF ITS COVER IS IN PLACE
• Before use, do not plug the appliance into the socket until the blender container
and multifunction are properly implemented.
• After use, disconnect the unit from the outlet before removing the blender bowl
base.
• Do not fill the blender bowl with food exceeding 80 °C.
• To avoid splashing, do not put more than 1 litter of liquid food into the blender
bowl.
12
Advertisement
Table of Contents
