Table of Contents
Advertisement
This device has 4 securities
1 on the lid of the Blender
1 based on the Blender
1 on the chopper lid
1 on the chopper base
VERY IMPORTANT: FOR SAFETY REASONS,
THE UNIT WORKS ONLY WHEN THE BLENDER
& THE MIXER AND ARE PERFECTLY IN PLACE
AND SAFETY ENGAGED.
IF THE UNIT DOES NOT START, IT IS NOT
NECESSARILY IN TROUBLE, ANY PARTS MAY
NOT BE IN PLACE OR LOCKED WELL.
ANY QUESTIONS REGARDING THE START OR PERFORMANCE
OF THE FOOD PROCESSOR,
CALL THE FOLLOWING PHONE NUMBER :
Before first use, remove the unit and all accessories carefully and paying attention
to the sharp accessories.
Clean with soap and water bowls and all accessories and dry thoroughly.
Clean the exterior trim and interior of the unit with a damp cloth and wipe dry.
This appliance is intended exclusively for domestic use.
1 / Place the base unit on a dry, level surface.
DO NOT CONNECT THE UNIT AS IT IS NOT FULLY ASSEMBLED.
2 / Place the bowl and turn clockwise to lock it in the safety position.
The triangle on the base & on the bowl must be aligned one above the other.
3 / Insert the rod into the hole in the centre of the base.
4 / Put knife, or kneader, or slicer on the drive shaft.
SAFETY
(33) 01 48 93 93 10 (call with no surcharge).
FIRST USE
8
Advertisement
Table of Contents
