Advertisement
programming timer
Programming
Button Description:
MODE+- Button: Local time and feeding time are set by this button.
SET+- Button: After pressing the MODE button, the SET button allows the respectively displayed
times to be changed.
ADJUST+-Button: After pressing the SET button, the respectively effected symbol (either time
or feeding mode) blinks and can be set to a higher number with "+" or lower number with
"-" button.
MANUAL Button: Automatically rotates the hopper once for a single manual feeding.
1. SET THE CLOCK:
Press SET button once and hours will blink.
Press the ADJUST button to set hour time. Press MODE and minutes will blink.
Press the ADJUST button to set minutes.
Press SET again and the current time will be displayed. The timer operates on a 24.00 hour
cycle, therefore 5 p.m. = 17.00 hours.
. SET THE FEEDING TIME:
Press the MODE button, 00:00 will be displayed.
Press the SET button, hours blink.
Press the ADJUST button to program hour of first feeding time.
Press the MODE button, minutes will blink.
Press the ADJUST button to program the minutes of first feeding time.
Press MODE again and the "1" digit will appear. This indicates a feeding at this programmed
interval. By pressing ADJUST again, the display will change to "i" indicating a single feeding
at this interval, press ADJUST again will change to " i i " indicating a double feeding will
occur at this programmed interval. Each feeding will be seperated by a 60 second interval.
Press SET again and first feeding interval program will be complete.
. PROGRAMMING ADDITIONAL FEEDINGS
Repeat steps above for programming additional feedings. The feeder can be programmed for
up to 4 times daily.
When the MODE button is pressed four times in sequentially, the timer will skip to the next
feeding interval.
. DELETING A FEEDING PROGRAM
Press MODE program to find program that will be deleted.
Press SET to select the program.
Press MODE twice and the number of the program will blink.
Press ADJUST to delete program.
Press SET to confirm deletion.
5. MANUAL OPERATION
Press MANUAL button, feeder will automatically dispense one feeding.
WWW.CURRENT-USA.COM
Advertisement
