Sony XBR-65Z9D Service Manual page 16

WB/MURA/CUC DATA TRANSFER
(Please apply when the Main board or panel is replaced.)
1. In "Panel/PQ" service mode.
a. Go to "WB/Mura/CUC data transfer" category by "↑" or "↓".
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
General Setting
Tuner
Wifi / BT
b. To select "WB/Mura/CUC data transfer", press "→" button.
[</>] Set [Home]Exit
c. To change data , press "←" or "→" on remote commander.
XBR-65Z9D
>>
>>
>>
>>
>>
>>
>>
2. In "WB/Mura/CUC data transfer".
a. Select "WB/Gamma data transfer" by pressing "↑" or "↓" on remote commander.
b. To change the items, press "←" or "→" on remote commander and press "Enter"
button.
Selectable items are:
0. SoC to T-con
1. T-con to SoC
2. Not action
c. Select "[start]" and press "Enter" button to start transfer.
Back
<[ 0. SoC to T-con
WB/Gamma data transfer
Mura data transfer <[ 0. SoC to T-con
CUC data transfer <[ 0. SoC to T-con
[Start]
*Please refer to another manual "Service Procedure for Panel, Board and Software Change /
Upgrade(P/N:9-888-450-02)" for details.
ADJUSTMENT
<<
]>
]>
]>
[</>] Set [Home]Exit
B-board T-con
replace replace replace
WB/ 1.T-con to 0.SoC to 0.SoC to
Gamma Soc T-con
1.T-con to 0.SoC to 1.T-con
Mura
Soc T-con
1.T-con to 0.SoC to 1.T-con
CUC
Soc T-con
Panel
T-con
to Soc
to Soc
16