SKLZ HINGE HELPER Getting Started page 2

IN THE BOX
GETTING STARTED
Your SKLZ Hinge Helper is designed to help improve your swing by providing a guide for consistent wrist movement.
Hinge Helper can be used with any club with a standard size round grip, except the putter.
Note: This product is compatible with standard size golf grips. The Hinge Helper will not work with mid-size or oversize grips.
1 Unscrew the knob to expand the black base
section and attach to the butt end of the grip.
Once in place, tighten the knob to secure the
black base section to the end of the grip.
A HINGE HELPER
Align Hinge Helper and club face
(Right-handed setup shown)
2 Make sure the Hinge Helper's upper section
is directly aligned with the leading edge of the
clubface.
If you are a left-handed golfer, completely remove
the screw and knob and move the guide arm to
opposite side, reversing the entire assembly.
VISIT SKLZ.COM TO LEARN MORE
3 Grip the golf club and hinge your wrists. Once you
find your fully hinged position, adjust the Hinge
Helper's guide arm so that it lightly touches the
side of the left wrist (right-handed golfers).
Then secure the guide arm to that position by
tightening the knob completely.