Table of Contents
Advertisement
3.3 Setting Accent/Velocity/CC per Step
Depending on how the track is set up (see settings section) each step
can send MIDI velocity, CC or both.
An equivalent Analog voltage is automatically sent out of accent jacks
too.
You can set the accent amount in coarse and fine increments:
To set the accent value of a step hold a pad and turn the rotary
encoder. The top row of step LEDs indicates the coarse value (16
steps)
To fine-tune the accent, hold shift while turning the rotary encoder. The
finer increments are displayed on the second row of step LEDs.
3.4 Skip Steps
You can shorten patterns by skipping up to 15 steps.
Hold skip and press any pad to set the step to skip (lit pad=skipping
step)
Tip: Skip has a different function in play mode!
Twisted-Electrons.com
Advertisement
Table of Contents
