twisted electrons CRAZY8 BEATS User Manual page 5

tracks that are currently being triggered.
The current pattern of each track is automatically stored in EEPROM
memory and loaded at startup
2.3 Chain Patterns
2.3.1 Activate/Deactivate Pattern Chain Mode
Press rec to toggle pattern chain mode on & off at any time
When rec is lit, Crazy8Beats will chain patterns to make songs.
Tip: Rec has a different function in edit mode!
2.3.2 Pattern Chain Slots
The chain slots are the building blocks for our song playlist.
The patterns to be played are stored in up to 16 slots that can be
individually enabled or disabled.
To enable or disable a slot hold rec and press any pad.
When the sequencer is playing and rec is lit, the pad corresponding to
the slot that is currently being played will flicker.
This chain slots are automatically stored in EEPROM memory and
loaded at startup
2.4 Skip or "Jump" to Step
Hold skip then press any pad to temporarily jump the sequencer to
that step. When you release skip the sequencer will resume at the
expected step
Twisted-Electrons.com