Dometic MD310 Installation And Operating Manual page 12

Using the safe
Changing the master code
A
NOTICE!
• If you forget your master code, nobody can access the safe any more
(not even the manufacturer). No resetting, or similar action, is
possible.
• Therefore note down the master code and store it very carefully in a
safe location.
• The safe has a factory setting code. We strongly recommend that you
change this code for security reasons.
You can change the factory setting code (888888). The safe must be opened for
this.
PIN 6X CLEAR
PIN 6X
CLOSE
PIN 6X CLOSE
➤ Enter the correct six digit master code.
➤ Press the CLEAR button.
✓ The display shows the message NEW.
➤ Enter a new six digit master code.
➤ Press the CLOSE button.
✓ The display shows the message AGAIN.
➤ Repeat the entry of the new six digit master code.
➤ Press the CLOSE button again.
✓ The safe confirms the change of the master code with the message DONE.
12
NEW
AGAIN
MD310, MD390, MD450
EN