chapter 4 upgrading your computer
Installing a Memory Module (DIMM) into the System
To install the DIMM, do the following:
1. Power OFF the notebook. Unplug the AC cord and all
cables/devices attached to the notebook. Remove the battery.
2. Place your hand on a large metal object momentarily to
discharge any static electricity. Place the notebook on a flat surface
and fully close the LCD lid.
3. Locate and remove the 9 Screw C's on the system device cover.
4. Remove the system device cover. The DIMM socket is now
seen as shown in the following diagram.
4-7