Advertisement
STEP 2C - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Strip back the wire covering the 3 fixture wires as far as you need to.
This will expose each fixture wire individually. Strip each end of 3
fixture wires.
C. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from outlet box
Black wire from
outlet box (or Red)
Bare, or Green
Ground wire
from outlet box
Green Ground Screw
on the Crossbar
Clean glass with household glass cleaner. Your installation is
completed and ready to use. Enjoy!
2018 QuoizelInc.
White wire
from mirror
Black wire
from mirror
Ground wire
from mirror
Figure 2C
visit us on-line at www.quoizel.com
QR3700
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
3of3
18.5"
24"
32"
26.5"
ReleasedDate:2018-04-16
1.75"
Advertisement
