Pre-Set Function - RAMTONS RM/577 Instruction Manual

9. Pre-set Function

1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stages can be set at most. Defrosting should not
be set in preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press" Micro./Grill/Combi. " once,"P100"will flash;
b. Press" Micro./Grill/Combi.
power till "P80" display;
c. Press "START/+30SEC./CONFIRM" to confirm;
d. Turn " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press " START/+30SEC./CONFIRM ". Then
do as following:
3) Press " CLOCK/PRE-SET ". The hour figures flash;
4) Turn " " to adjust the hour figures, the input time should be within 0--23.
5) Press " CLOCK/PRE-SET ", the minute figures will flash.
6) Turn " " to adjust the minute figures, the input time should be within 0--59.
7) Press " START/+30SEC./CONFIRM " to finish setting.
when the time arrives, then cooking will start automatically.
Note: 1) Clock must be set first. Otherwise,pre-set function will not work.
2) Defrost cannot be set as pre-set function.
1 0. Auto Menu
1) In waiting states, turn "
2) Press "START/+30SEC./CONFIRM " to confirm the menu you choose;
3) Turn " " to choose the food weight;
4) Press "START/+30SEC./CONFIRM " to start cooking;
5) After cooking finish, the buzzer sounds five times.
" again or turn "
" right to choose the menu from "A-1" to "A-8";
16
" to choose 80% microwave
Buzzer will ring twice