The undersigned hereby declares under full responsability that the following product: DISHWASHING MACHINE (product description) SH 120 E BT..., (type model) for which this declaration refers to in accordance to the following standards: EN 60335-1, EN 60335-2-58, EN 61000-3-2, EN 61000-3-3, EN 55014-1, EN 55014-2...
Page 3
DISHWASHING MACHINE SH 120 E BT The illustrations concerning these instructions are on the inside of the back cover 36893...
Page 4
Become thoroughly familiar with the contents of thi manual before installing, setting up, adjusting and servicing utensil and pot washer Mod. SH 120 E BT . Only contact an authorized technical center or BLUE SEAL in the event of breakdowns or faulty machine operation. The manufacturer reserves the right to modify its products,whenever necessary ,without affecting...
Page 5
INDEX Important...............pag. 4 Overall dimensions..........pag. 6 Technical data............pag. 7 Description of the controls........pag. 12...
OVERALL DIMENSIONS 1825 TANK LINEAR ASSEMBLY LAYOUT FRONT OF MACHINE FEET POSITION CORNER ASSEMBLY LAYOUT 672,5 Drain pipe fitting Water inlet Electric supply...
TECHNICAL DATA SH 120 E BT 55/36/24 230V/1~50Hz 7100 W 6000 W 4000 W 1100 W 400V/3N ~50Hz 10100 W 9000 W 4000 W 1100 W SH 120 E BT 42 l 8,2 l 2÷ 4 bar. Ø 3/4"G. 3,5 l...
Page 8
ENGLISH leaks from pipes. Air, fluids under pressure or irritants could PARTICULAR RECOMMENDATIONS cause serious damage to both persons and/or property. FOR THE OPERATOR Never use the hands instead of adequate tools when operating the machine. Do not operate the machine without having become fully familiar with the contents of this manual and without having Never use the hands or other objects to stop moving parts.
Page 9
Immediately notify the haulage contractor both by phone and in writing by registered letter with return The dishwashers of the SH 120 E BT line give an excellent receipt attached; idea of the know-how achieved by Hoonved in the field of 2 - Inform the manufacturer by registered letter (with return machines for catering sector.
Part 2: For the operator ENGLISH 2.1.c Cycle selection SH 120 E BT WASHING PHASES Press the “SD” or CYCLE button to select the washing cycle required from the 4 different cycles available (SHORT, ME- 2.1.a Machine OFF DIUM, LONG, INTENSIVE) and specifically: When the machine is switched OFF the display will read “OFF”:...
Page 12
ENGLISH Part 2: For the operator 2.1.f Self-washing and Draining 3) During rinsing, the boiler temperature is indicated and the display LEDs light up in sequence; When you have finished washing, SWITCH OFF the machine by pressing the “IL” button. Having drained the machine and released the over- flow, close the tank-access door and keep press the LC1 LC2 LC3 LC4...
Page 13
Part 2: For the operator ENGLISH 2.1.i Switching off the SH 120 E BT washer at the end 2.1.h Reading the TEMPERATURES of the day At the end of the working day SWITCH OFF the CAP/ At any time, with the machine switched ON or OFF, by SO washer by pressing the “IL”...
ENGLISH Part 2: For the operator SUMMARY TABLE of SUMMARY TABLE of ALARM MESSAGES DISPLAYED OTHER MESSAGES DISPLAYED MESSAGE DESCRIPTION MESSAGE DESCRIPTION Failure to COMPLETE CYCLE DOOR OPEN BOILER WATER overheating WATER FILLING in TANK BOILER and/or TANK TEMPERATURE SELF WASHING and DRAINING cycle PROBE broken or disconnected Lack of WATER in TANK MANUAL DRAINING cycle...
Need help?
Do you have a question about the SH 120 E BT and is the answer not in the manual?
Questions and answers