Setup -Networksetup - Alfa Network AWAP803 User Manual

4.1 Setup – Network Setup
MAKE CORRECT NETWORK SETTINGS OF YOUR COMPUTER
To change the configuration, use Internet Explorer (IE) or Netscape Communicator to connect
the WEB management
192.168.1.250
This following screen contains all of the AP's basic setup functions.
Most users will be able to configure the AP and get it working properly using the default
settings.
Network Setup
Identity
Device Name: These fields allow you to input a host name for the AP.
Local Area Network
♦ Dynamic: If your LAN supports DHCP assigning dynamic IP address then please select
this type.
♦ Static IP:
This' s default connection type. If you are required to use a fixed IP address to
connect to the LAN, then select Static IP.
IP Address: This' s the AP's IP address.
Subnet Mask: This' s the AP's Subnet Mask.
Default Gateway: This' s the AP's Gateway Address.
Those above items can be adjusted that depends on real network architecture if it is
necessary.
Change these settings as described here and click the Apply button to apply your changes or
click Cancel to cancel your changes. For additional information, click Help.
10