Download Print this page
Pentair FLECK 9000 Service Manual

Pentair FLECK 9000 Service Manual

Advertisement

Quick Links

FLECK
9000/9100/9500
®
SERVICE MANUA
L
www.pentairaqua.com

Advertisement

loading

Summary of Contents for Pentair FLECK 9000

  • Page 1 FLECK 9000/9100/9500 ® SERVICE MANUA www.pentairaqua.com...
  • Page 2 JOB SPECIFICATION SHEET TABLE OF CONTENTS Job Number: ________________________________________ JOB SPECIFICATION SHEET ..........2 Model Number: ______________________________________ EQUIPMENT CONFIGURATION..........2 Water Test: _________________________________________ INSTALLATION & START-UP ..........3 Capacity Per Unit: ____________________________________ 9000/9100/9500 (3200 SERIES) ELECTRO MECHANICAL Mineral Tank Size: ________ Diameter: ______Height: ______ TIMER ASSEMBLY ............6 Brine Tank Size and Salt Setting per Regeneration: _________ POWER HEAD ASSEMBLY ...........8...
  • Page 3 INSTALLATION & START-UP 10. Place approximately 1 inch (25 mm) of water above the grid plate. If a grid is not utilized, fill to the top of the air check in the salt tank. Do not add salt to the brine tank at this time. Water Pressure 11.
  • Page 4 7 Release Compound is used in the ® pins at the higher numbered end of this section as required. manufacture of Pentair control valves. The use of The number of pins multiplied by two equals minutes of other types of lubricants may attack the control’s plastic or rubber components.
  • Page 5 INSTALLATION & STARTUP CONTINUED 4. Because the control valve regenerates with soft water from the other tank, subtract the water used for regeneration. Take each regeneration cycle and calculate the water used. Changing Length of Brine Tank Refill Time Example: Unit is set for a 16-inch diameter tank with 4 ft The second group of holes on the program wheel determines resin and salted at 8 lbs.
  • Page 6 All Pentair trademarks and logos are owned by Pentair, Inc. or its affiliates. All other registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services. Pentair reserves the right to change specifications without prior notice.

This manual is also suitable for:

Fleck 9100Fleck 9500