Network Activity; Updating The Software - Coast to Coast Winegard ConnecT 2.0 Operation Manual

NETWORK ACTIVITY

In the Network Activity option, the name of each device that
is connected wirelessly to the Winegard ConnecT product will
be displayed.

UPDATING THE SOFTWARE

When first setting up the Winegard ConnecT 2.0 it is recommended
to check for software updates the first time the system is connected
to an Internet signal. It is also recommended to check for updates
every couple months for fixes and added features.
NOTE: To retain all passwords and name changes during updates, click
Keep Settings. See figure 11.
1) From the Status Screen, choose UPDATE SOFTWARE from the
drop down menu.
NOTE: Updating the system software from the network will require the
Winegard ConnecT to be connected to an internet source.
2) Once on the update software screen, click CHECK FOR LATEST
VERSION. See figure 11.
3) There will be a slight delay while the Winegard ConnecT compares
the current software version to the latest available version. If you
have the latest version there is no need to update the software,
click CANCEL. If the check finds that you have older software,
click PROCEED to update to the latest version. See figure 12.
4) If you clicked PROCEED, the system will unavailable for several
minutes while the outdoor antenna resets. After it reboots, the
system will function normally.
NOTE:
During this reset, your device may switch to a local remembered
WiFi network. This will not allow you to return to the ConnecT setup
screens. If this happens, simply reconnect manually to the ConnecT's SSID
again from your device.
Forget and Saved Networks
If you want to forget the WiFi network that you are currently
on click the FORGET WIFI button. Figure 13.
Figure 13
To view the list of saved networks. Click the SAVED WIFI
button. On this page you will be able to prioritize your
list of saved networks, delete any or all saved networks,
and edit any saved network. Figure 14.
5
Figure 11
Figure 12
Figure 14