Installing The Sim Card - Coast to Coast Winegard ConnecT 2.0 Operation Manual

Long-range, high-performance cellular wifi extender
Table of Contents

Advertisement

INSTALLING THE SIM CARD

Operation: First Time Setup (Cellular Service)
1) Turn the ConnecT 2.0 on.
2) Turn on the WiFi enabled device(s) that you want to connect and scan
for wireless networks. It may take a few minutes for the network
(Winegard2ghzXXXXXX) to appear.
3) The label located on the front of this manual lists the unique default
SSID and password. Select this WiFi signal from the list of wireless
networks and connect. Once the correct SSID has been selected,
enter the password. It is recommended to set your device(s) to
automatically connect with the Winegard ConnecT 2.0.
4) Once connected, open an Internet browser and type 10.11.12.1 into
the address bar and press Enter. This will take you to the Admin
Login Screen.Login using:
Username: admin Password: admin
See figure 5.
5) Next, you will need to connect to the internet in order to download
the correct cellular provider's firmware. Select WiFi Only and click
the SELECT button.
6) Click the SCAN FOR WIFI button and select one of the usable WiFi
networks.
7) Once connected to the internet, under the NAVIGATE TO PAGE field,
click on the drop-down menu and select CHANGE PROVIDER on the
main status screen. See figure 6.
8) Enter the correct cellular provider in the CELLULAR PROVIDER field
and then enter the correct APN for the SIM card in the CELLULAR
APN field.
9) Click on the CHANGE PROVIDER button.
10) The unit will start to download the necessary firmware. Once the
download is completed, click on the PROCEED button (if available)
to start the flash procedure. Next, click on the 4G/LTE ONLY Internet
Access option on the main Status screen. Your internet status should
change to Connected to "Your Provider". See figure 7.
NOTE:
On the main Status screen, after the first time setup of your cellular
SIM card, you are able to choose from connecting to a useable WiFi connection
or 4G/LET signal. Each time you change the SIM card/cellular provider you will
need to repeat steps 1-10 of the First Time Setup (Cellular Service).
3
cont.
Figure 5
Figure 6
Figure 7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wf2au1b

Table of Contents