System Log
This System Log page shows the information of the current activities on
the router.
To enable system log function:
1.
Mark the "Enable Log" checkbox.
2.
To see all information of the system, select the "system all"
checkbox.
3.
To see wireless information only, select the "wireless"
checkbox.
To sent the log information to a certain note, select the
"Enable Remote Log" checkbox and fill in the IP address in
the "Log Server IP Address" box.
4.
Click the "Apply Changes" button to activate
You could also click the "Refresh" button to refresh the log information or
click the "clear" button to clean the log table.
47