Alfa Network AIP-W610 User Manual page 35

PPPoE Mode
User Name, password
and service name
Connection Type
Idle Time:
MTU Size
Attain DNS automatically:
Set DNS Manually
Fill in the User Name, password and service
name that provided by your ISP.
"Continuous" is for Always keep connection
"Connect on demand" is for bill by connection time.
You can set up the Idle time for the value specifies the
number of time that elapses before the system
automatically disconnects the PPPoE session.
"Manual" To connect to ISP, click "Connect" manually
from the WEB user interface. The WAN connection will
not disconnected due to the idle timeout. If the WAN
line breaks down and latter links again, the router will
not auto-connect to the ISP.
The value specifies the number of idle time that
elapses before the system automatically disconnects
the PPPoE session.
To Enable the Maximum Transmission Unit of Router
setup. Any packet over this number will be chopped up
into suitable size before sending. Larger number will
enhance the transmission performance.
Enter your MTU number in the text-box to set the
limitation.
If your DNS provide by ISP is dynamic, choose
"Attain DNS automatically
To specify the DNS, and enter the DNS provided by
your ISP in DNS 1 2 3.
30