Advertisement
Quick Links
Temperature Relays and MINIKA®
Operating Manual MU100W
- Measuring- Transducer for Potentiometers
MU100W
12100-0703-00
Mains Monitoring
Digital Panelmeters MINIPAN®
Switching Relays and Controls
Page 1 / 6
ZIEHL industrie – elektronik GmbH + Co KG
Daimlerstr.13, 74523 Schwäbisch Hall, Germany
+ 49 791 504-0,
info@ziehl.de,
Measuring Transducers
Grid- and Plant Protection
updated: 2018-11-09 / sm
www.ziehl.de
www.ziehl.de
Advertisement
Related Manuals for ZIEHL MU100W
Summary of Contents for ZIEHL MU100W
- Page 1 ZIEHL industrie – elektronik GmbH + Co KG Daimlerstr.13, 74523 Schwäbisch Hall, Germany + 49 791 504-0, info@ziehl.de, www.ziehl.de Temperature Relays and MINIKA® Mains Monitoring Digital Panelmeters MINIPAN® Switching Relays and Controls Measuring Transducers Grid- and Plant Protection updated: 2018-11-09 / sm...
-
Page 2: Table Of Contents
2 Application and short description The MU100W measuring transducer converts the position of a potentiometer into a linear signal 0/4- 20 mA respectively 0-10 V. Zero can be easily scaled 0...40 %, Full-scale 60 ... 100 % of the range of the potentiometers by pressing a button. -
Page 3: Overview Of Functions
Instead of the industrial norms and regulations written in this instruction manual valid for Europe, you must observe out of their geographical scope the valid and relevant regulations of the corresponding country. MU100W 12100-0703-00 Page 3 / 6... -
Page 4: Installation
To switch the current output to 0…20 mA, press and hold the zero button for approx.. 5s until the yellow LED 4…20 mA goes out. The voltage output is always set to 0…10 V independent of the current output. 7.5 Factory setting The current output is factory set to 0…20 mA. MU100W 12100-0703-00 Page 4 / 6 www.ziehl.de... -
Page 5: Technical Data
Protection class housing / terminals IP 40 / IP20 Standard rail 35 mm Mounting EN60715 M4, only with additional bolt (not part of delivery) Optional: screw mounting approx. 130 g Weight Subject to technical modifications MU100W 12100-0703-00 Page 5 / 6 www.ziehl.de... -
Page 6: Housing Type V2
Plombenlasche / latch for sealing Frontplatteneinsatz / front panel Kennzeichen für unten / position downward Riegel bei Wandbefestigung mit Schrauben. Riegelbohrung Ø 4,2 mm / for fixing to wall with screws, Ø 4,2 MU100W 12100-0703-00 Page 6 / 6 www.ziehl.de...