The device has a universal power supply, that is suitable for DC- and AC voltages. Before connecting the device to supply-voltage make sure that the connected voltage corresponds with the voltage on the lateral type on the device. MU2000K 12600-0752-00 Page 2 / 8...
Parameterization „output“ → LED Power flashes 4x • Select with button [Set] the output Number range Of flashes U + I 0 - 10 V / 0 - 20 mA 2 - 10 V / 4 - 20 mA MU2000K 12600-0752-00 Page 3 / 8 www.ziehl.de...
Page 4
U (AC / DC) 0 - 10 V / 0 - 20 mA 0 … 5 A 0 … 5 A I (AC / DC) 2 - 10 V / 4 - 20 mA MU2000K 12600-0752-00 Page 4 / 8 www.ziehl.de...
Page 5
LEDs (U + I) 1 x flash -> output 0 - 10 V / 0 - 20 mA o LEDs (U + I) 2 x flash -> output 2 - 10 V / 4 - 20 mA • Press button [Down] End of parameterization, LED ON lights permanently MU2000K 12600-0752-00 Page 5 / 8 www.ziehl.de...
Page 6
80 ms (60Hz = 67 ms) 160 ms (60Hz = 133 ms) 320 ms (60Hz = 267 ms) 640 ms (60Hz = 533 ms) • Press button [Down] End of parameterization, LED ON lights permanently MU2000K 12600-0752-00 Page 6 / 8 www.ziehl.de...
22mA at output 0/4…20 mA, 11V at output 0/2…10 V (LED Power flashes quickly) Cause Internal error of device Remedy Reset by interrupting supply voltage. If the error cannot be patched by a Reset send back to factory for repair. MU2000K 12600-0752-00 Page 7 / 8 www.ziehl.de...
Snap mounting on 35 mm standard rail EN 60 715 or M4 screws Weight app. 100 g Subject to technical changes 9 Housing Type K Dimensions in mm 22,5 110,0 100,5 lower part upper part screw holes for screw-mount MU2000K 12600-0752-00 Page 8 / 8 www.ziehl.de...