Table of Contents
Advertisement
3.2.8.2 Q&A mode
The follow setting is only for AP client. In AP only need set
allow Q&A or button+Q&A.
3. After setup AP and AP client in both side.
Press the button of AP till LED sparkling. Then
press the button of AP client till LED sparkling.
After a period of time, AP client will set SSID,
security and connect to AP automatically
3.2.9 TCP/IP
Enable 802.11d
Set MAC
spanning tree to
clone if
protect loop
necessary
1.Select Q&A
2.Enter four digits number
3.Answer favorite name
Set IP Address.
Subnet Mask
Default Gateway
Set DHCP mode to DHCP server
or set as a client or disable
Input DNS server and
domain name
Hide quick links:
Advertisement
Table of Contents
