Leds Displays; Extra Wash" / "Super Wash" Button; Audible Signal - Siemens FX-C Repair Instructions

3.6

LEDs displays

The information about the programme sequence is showed throw the
three LED's. They can show the following steps:
► End of program: Spin LED flashes. The programme has
ended. The washing can be taken out of the washing
machine.
► Spin: Spin LED illuminates. The washing machine performs
the final spin cycle.
► Rinse: Rinse LED illuminates. The washing machine performs
the rinse cycles.
► Wash: Wash LED illuminates. The washing machine washes.
► Ready: Wash LED flashes. The washing machine has
switched on and waits for the start command following
actuation of the "Start" button.
3.7

"Extra Wash" / "Super Wash" button

Press this button to run an additional rinse cycle.
209_58300000115677_ara_en_f.doc – 26.03.08
3.8

Audible Signal

The audible signal indicates the button activation/deactivation, the
individual status of the programme (for instance start or end) or errors
in operation.
3.8.1 Signal for the extra function and display buttons.
► Turn the programme selector to „Ein/Aus"
► Press the „Start/Pause" button and turn the programme
selector to „Koch/Buntwäsche". Hold the „Start/Pause" button
down until the signal is heard. The selected adjustment is
memorised.
► Turn the programme selector one more to „Ein/Aus".
When the extra funtions start, a long signal is heard. When an extra
function is turned off, the audible signal is a short one. This funtion
may be deactivated in the same way as it is started
3.8.2 Signal for the programme status and the „Start/Pause"
button.
► Turn the programme selector to „Ein/Aus"
► Turn the programme selector to „Koch/Buntwäsche", press the
Spülen Plus button and wait. You will hear how the audible
signal is activated or deactivated. Release the button when
the signal comes on. The alarm of the „Start/Pause" button
and the programme status is activated.
► Turn the programme selector one more to „Ein/Aus".
When the programme is started by pressing the „Start/Pause" button,
a brief audible signal will be heard; when the programme is in pause,
no signal will be heard.
Seite 8 von 34